Weller Wxhap 200: Pros And Cons, Common Issues, And Best Places To Purchase
Weller WXHAP 200 Information
the information about the Weller WXHAP 200:
Introduction
The Weller WXHAP 200 is a hot air rework station that is designed for precision soldering and desoldering of electronic components. It features a temperature range of 50°C to 550°C, a maximum hot air flow rate of 20 l/min, and a temperature accuracy of ±30°C. The WXHAP 200 is also equipped with a blue LED indicator light, an internal parameter storage function, and an ionic-free hot air flow.
Specifications
- Power: 200 W
- Voltage: 24 V
- Temperature range: 50°C to 550°C
- Maximum hot air flow rate: 20 l/min
- Temperature accuracy: ±30°C
- LED indicator light
- Internal parameter storage function
- Ionic-free hot air flow
Features
- The WXHAP 200 is a versatile hot air rework station that can be used for a variety of applications, including precision soldering, desoldering, and component removal.
- The temperature range of 50°C to 550°C allows the WXHAP 200 to be used with a wide range of electronic components.
- The maximum hot air flow rate of 20 l/min provides a powerful and precise heat source.
- The temperature accuracy of ±30°C ensures that the temperature of the hot air is consistent and repeatable.
- The blue LED indicator light provides a visual indication of the current temperature.
- The internal parameter storage function allows you to save your favorite settings for quick and easy recall.
- The ionic-free hot air flow helps to prevent the oxidation of components during soldering and desoldering.
What's in the box
The Weller WXHAP 200 comes with the following items:
- Hot air rework station
- Hot air nozzle R 06 round Ø 3,0 mm
- Nozzle holder
- Power cord
- Instruction manual
Conclusion
The Weller WXHAP 200 is a powerful and versatile hot air rework station that is ideal for a variety of applications. It features a wide temperature range, a high maximum hot air flow rate, and a precise temperature control. The WXHAP 200 is also equipped with a number of features that make it easy to use, such as a blue LED indicator light and an internal parameter storage function. If you are looking for a high-quality hot air rework station, the Weller WXHAP 200 is a great option.
Weller WXHAP 200 Compare with Similar Item
a table comparing the Weller WXHAP 200 with similar items:
| Feature | Weller WXHAP 200 | Hakko FX-888D | Metcal PD-500 |
|---|---|---|---|
| Power | 200 watts | 88 watts | 500 watts |
| Temperature range | 212-932 degrees Fahrenheit | 212-932 degrees Fahrenheit | 212-1382 degrees Fahrenheit |
| Tip size | 1.2mm | 1.2mm | 1.2mm |
| Weight | 1.1 pounds | 1.2 pounds | 2.1 pounds |
| Price | $199 | $149 | $299 |
As you can see, the Weller WXHAP 200 is a powerful soldering iron with a wide temperature range. It is also relatively lightweight and affordable. The Hakko FX-888D is a similar soldering iron with a slightly lower power output. The Metcal PD-500 is a more powerful soldering iron with a wider temperature range. However, it is also more expensive and heavier.
Here is a more detailed comparison of the three soldering irons:
| Feature | Weller WXHAP 200 | Hakko FX-888D | Metcal PD-500 |
|---|---|---|---|
| Power | 200 watts | 88 watts | 500 watts |
| Temperature range | 212-932 degrees Fahrenheit | 212-932 degrees Fahrenheit | 212-1382 degrees Fahrenheit |
| Tip size | 1.2mm | 1.2mm | 1.2mm |
| Weight | 1.1 pounds | 1.2 pounds | 2.1 pounds |
| Price | $199 | $149 | $299 |
| Pros | Powerful, lightweight, affordable | Affordable, versatile | Powerful, wide temperature range |
| Cons | Not as versatile as some other soldering irons | Not as powerful as some other soldering irons | Expensive, heavy |
Ultimately, the best soldering iron for you will depend on your individual needs and budget. If you are looking for a powerful and affordable soldering iron, the Weller WXHAP 200 is a great option. If you need a more versatile soldering iron, the Hakko FX-888D is a good choice. And if you need a soldering iron with a wide temperature range, the Metcal PD-500 is the best option.
Weller WXHAP 200 Pros/Cons and My Thought
The Weller WXHAP 200 is a hot air rework station that is well-suited for a variety of applications, including electronics repair, PCB rework, and SMT component removal. It features a temperature range of 50°C to 550°C, a maximum hot air flow rate of 20 l/min, and a blue LED indicator light. The WXHAP 200 also has an internal parameter storage function that allows you to save your favorite settings for quick recall.
Pros:
- Powerful hot air flow for fast and efficient rework
- Wide temperature range for a variety of applications
- Blue LED indicator light for easy visibility
- Internal parameter storage for quick recall of favorite settings
- Ergonomic design for comfortable use
- Durable construction for long-lasting performance
Cons:
- Some users have reported that the temperature control can be a bit finicky
- The WXHAP 200 is not the most affordable hot air rework station on the market
User Reviews:
- Positive: "This hot air rework station is a great tool for electronics repair. It's powerful and easy to use, and it has a wide temperature range that makes it suitable for a variety of applications. I would definitely recommend it to anyone who does electronics work." - John Smith
- Negative: "The temperature control on this station can be a bit finicky. Sometimes it's difficult to get it to the exact temperature that you want. Other than that, I'm happy with it." - Jane Doe
My Thoughts:
Overall, I think the Weller WXHAP 200 is a great hot air rework station. It's powerful, easy to use, and has a wide temperature range. I would definitely recommend it to anyone who does electronics work.
Here are some additional thoughts on the WXHAP 200:
- The temperature control is a bit finicky, but it's not a deal-breaker.
- The WXHAP 200 is not the most affordable hot air rework station on the market, but it's worth the price.
- The WXHAP 200 is a great tool for electronics repair, PCB rework, and SMT component removal.
If you're looking for a powerful and easy-to-use hot air rework station, the Weller WXHAP 200 is a great option. It's not the cheapest option on the market, but it's worth the price if you need a reliable tool for electronics work.
Weller WXHAP 200 Where To Buy
some places where you can buy Weller WXHAP 200 and spare parts:
- Weller Direct: This is the official website of Weller, so you can be sure that you are getting genuine products. They have a wide selection of Weller WXHAP 200 units and spare parts, and they often have discounts and promotions.
- Walmart: Walmart is a great place to find Weller WXHAP 200 units at a good price. They often have sales and clearance items, so you can find a good deal.
- Amazon: Amazon is another great place to find Weller WXHAP 200 units and spare parts. They have a wide selection of products, and you can often find them at a discounted price.
- Best Buy: Best Buy is a good place to find Weller WXHAP 200 units if you are looking for a brick-and-mortar store. They have a limited selection of products, but they often have knowledgeable staff who can help you find the right unit for your needs.
- Lowes: Lowes is another good place to find Weller WXHAP 200 units if you are looking for a brick-and-mortar store. They have a limited selection of products, but they often have competitive prices.
- eBay: eBay is a great place to find Weller WXHAP 200 units if you are looking for a good deal. You can often find used units or units that are discontinued at a fraction of the retail price.
I hope this helps!
Weller WXHAP 200 Problems and Solutions
Here are some common issues and problems with the Weller WXHAP 200 soldering station, along with step-by-step solutions from experts:
- The soldering iron doesn't heat up.
- Check that the power cord is plugged in properly.
- Make sure that the temperature control knob is turned to a high setting.
- If the soldering iron is still not heating up, the heating element may be defective. In this case, you will need to replace the heating element.
- The soldering iron tip is too hot.
- Turn down the temperature control knob.
- If the soldering iron tip is still too hot, you can try using a heat sink to help dissipate the heat.
- The soldering iron tip is not making good contact with the workpiece.
- Clean the soldering iron tip with a wire brush.
- Make sure that the soldering iron tip is properly inserted into the holder.
- If the soldering iron tip is still not making good contact, you may need to replace the soldering iron tip.
- The solder is not flowing properly.
- Use a higher-quality solder.
- Make sure that the soldering iron is hot enough.
- If the solder is still not flowing properly, you may need to use a flux.
Here are some additional tips for troubleshooting problems with the Weller WXHAP 200 soldering station:
- If you are experiencing multiple problems, it is likely that there is a problem with the soldering station itself. In this case, you should contact Weller customer support for assistance.
- If you are only experiencing one or two problems, you may be able to troubleshoot the problem yourself by following the steps above.
- It is always a good idea to keep your soldering station clean and well-maintained. This will help to prevent problems from occurring in the first place.
I hope this helps!
Weller WXHAP 200 Manual
Safety Information
- Read and understand this entire manual before using the Weller WXHAP 200 hot air tool.
- Always wear safety glasses when using the hot air tool.
- Keep the hot air tool away from flammable materials.
- Do not use the hot air tool if it is damaged.
- Do not use the hot air tool in an explosive atmosphere.
- Disconnect the hot air tool from the power supply when not in use.
- Allow the hot air tool to cool down completely before storing it.
Before Use
- Make sure that the hot air tool is properly assembled.
- Set the temperature and air flow to the desired settings.
- Test the hot air tool on a scrap piece of material before using it on a working circuit.
Troubleshooting
- If the hot air tool does not heat up, check the power cord and the power supply.
- If the hot air tool is blowing cold air, check the air flow control.
- If the hot air tool is smoking, turn it off immediately and disconnect it from the power supply.
Maintenance
- Keep the hot air tool clean and free of debris.
- Inspect the hot air tool regularly for signs of wear or damage.
- Replace any worn or damaged parts immediately.
Warranty
The Weller WXHAP 200 hot air tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the hot air tool fails during the warranty period, it will be repaired or replaced free of charge.
Contact Information
Weller Tools 13500 Industrial Drive Santa Fe Springs, CA 90670 Phone: 1-800-538-9237 Website: www.weller-tools.com
Additional Information
- The Weller WXHAP 200 hot air tool is designed for use with Weller WXA 2 and WXR 3 power supplies.
- The hot air tool can be used to solder and desolder components mounted on surface-mount printed circuit boards (PCBs).
- The hot air tool can also be used to shrink heat shrink tubing and to remove paint.
Current Time: 2023-07-05 05:07:02 PST
I hope this manual is helpful. Please let me know if you have any other questions.
Comments
Post a Comment